New features

Compact Plant - PCP 020 ®

The first stage of the waste water treatment process, both urban as well as industrial, consist in a mechanical pretreatment of them.

In such pretreatment it is included:

• The elimination of solids (screening or separation)
• The grit elimination (grit removal)
• The elimination of grease (grease removal)

The PCP ®-020 installations allow to carry out the above mentioned...

click on the image to enlarge
Compact Plant

To get more information on
Compact Plant

Grit Washing Plant - HIDROSAND ®

GRIT WASHING PLANT HIDROSAND ®

Meant to eliminate grits in the inert residual spillway or as a pre requirement for the recycling.

Grit treatment systems requirements:

The regulation:

For municipal residues:

Class 1 spillway: matter content organic<3%
Class 2...

click on the image to enlarge
Grit Washing Plant

To get more information on
Grit Washing Plant

Horizontal Rotor Aeator - RD ®

ROTOR AREATOR type RD ®, is a horizontal aereator, in which the main axis rotates parallel to the water level. Is a specially designed equipment to transfer oxygen in the biologycal stage of the waste water treatment plants.

The rotor, which is the active part, is constituted of a tabular axis over which the racks are fastened.

When the spin is done, oxygen is transfered inside the liq...

click on the image to enlarge
Horizontal Rotor Aeator

To get more information on
Horizontal Rotor Aeator

Solar Drying - HELIOBOLT ®

1.- FUNCIONING PRINCIPLE

1.1.- General principle of solar drying

Solar drying consists in putting in contact, under a greenhouse, a regularly renovated air and sludge distributed over a concrete floor and mechanically removed. Between the entrance and exit of the greenhouse, the air is charged with water vapor, at the expense of the sludge th...

click on the image to enlarge
Solar Drying

To get more information on
Solar Drying

Disk Filter | Micro Screen - ROTADRUM ®

INTRODUCTION.:

The ROTADRUM ® micro screen is used for the micro filtration of solids, a very robust, mono block piece of machinery, with a minimum mesh of 10 microns and maximum 1000 microns.

Due to its compact and resistant design this equipment can work without problems during 24 hours/day during long periods of time and without needing any type of maintena...

click on the image to enlarge
Disk Filter | Micro Screen

To get more information on
Disk Filter | Micro Screen

Hydraulic Pincers - PHR-030 ®

CONSTRUCTION

All the models have the same basic construction and can be supplied with the same special characteristics, such as:

Wider or narrower grid
Greater working depth
Two speed motor for movement and elevation
Manufactured in stainless steel


The hoist is built in two profiles UPN and covered with a layer of steel. This way a profile is ob...

click on the image to enlarge
Hydraulic Pincers

To get more information on
Hydraulic Pincers

Filtering Micro-sieve - ROTADISC ®

MAIN:

The ROTADISC ® Micro sieve is a very robust, mono block piece of equipment designed for micro solids filtration, with a minimum mesh of 10 microns and maximum 1000 microns.

Due to its compact and resistant design, this equipment can work without any problems during 24 hours for a long period of time and without requiring any type of maintenance. The <...

click on the image to enlarge
Filtering Micro-sieve

To get more information on
Filtering Micro-sieve

Grit separator system - VORTEX

SYSTEM OPERATION


*Continuous Operation:

1. Influent enters the cicular settling chamber through intel chanel
2. The stream decelerantes and all particulate with a SG1 tends to settle toward the
upper setting tank bottom
3. A slowly rotating impeller creates a vortex zone which acts only on the lower debsity
particles, spi...

click on the image to enlarge
Grit separator system

To get more information on
Grit separator system

Estruagua - Water and solids treatment specialists

Water and solids treatment specialists